How To Fix A Swingline Stapler. Take out any staples that are jammed into the swingline stapler by twisting them as you pull with a pair of needle nose pliers. Then, push down like you normally use the stapler to expel the jammed staple.
Swingline™ Loading your SmartTouch™ Stapler YouTube from www.youtube.com
Annoying design but its fixable.the copper staple pusher shown on the bottom r. Pull the plastic top up to expose the stapler tray. Took 3 days to figure out.
As You Do So, The Pin Will Come Out From The Top.
Check that you’re loading the stapler with the right size of staples. Place an object between the stapler and the base to try and unjam it. If it is too thick then the stapler will not close correctly and will require too much force to staple.
Pull The Tray Away From The Base To Gain Better Access To The Jam.
Steps hold the stapler's base in place. Slide the switch on the side of the swingline electric stapler between manual and automatic stapling. Use a thin object to separate the top from the bottom if they’re stuck.
Other Models Include A Silver Tab On The Bottom Of The Stapler, Toward The Back.
Then, manage something thin and sharp like a paper clip. How do you fix a swingline stapler? Insert the clip from the bottom of the opening of the stapler and push up.
Use A Sharp Object To Push The Jammed Staple Up From The Bottom.
I made this video because the spring fell out of my stapler and i couldn't figure out how to put. If that doesn’t work, empty the stapler and pull the tray away from the base to give you better access to the staple. Took 3 days to figure out.
Hold The Base Firmly In One Hand And Pull Back The Top Of The Stapler, Including The Staple Tray, To Open It For Tacking.
Cut the foam to fit the width opening of the stapler and guess at the thickness. Hold the stapler against a flat surface, such as a table. Insert the staples into the carrier and push it back in until it clicks into position.
